AMFLO PRODUCTS -- 1220 AIR TOOL OIL  -- 9150-00N054434
<pre>=====================  Product Identification  =====================

Product ID:1220 AIR TOOL OIL
MSDS Date:10/01/1988
FSC:9150
NIIN:00N054434
=== Responsible Party ===
Company Name:AMFLO PRODUCTS
Address:1111 E MCFADDEN AVE
Box:15286
City:SANTA ANA
State:CA
ZIP:92705
Country:US
Info Phone Num:714-547-9000
Emergency Phone Num:714-547-9000
Preparer's Name:A. LUM
CAGE:14592
=== Contractor Identification ===
Company Name:AMFLO PRODUCTS
Address:1111 E MCFADDEN AVE
Box:City:SANTA ANA
State:CA
ZIP:92705
Country:US
Phone:714-547-9000
CAGE:14592

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SEAL OIL; (SEVERELY SOLVENT TREATED OIL)
CAS:64742-30-9
Fraction by Wt: 20-30%
OSHA PEL:5 MG/M3 OIL MIST
ACGIH TLV:5 MG/M3 OIL MIST

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATE, SOLVENT DEWAXED
    (SEVERE), HEAVY PARAFFINIC; (SEVERELY SOLVENT TREATED OIL)
CAS:64742-65-0
RTECS #:PY8038501
Fraction by Wt: 70-100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOT EXPECTED TO CAUSE
    RESPIRATORY TRACT IRRITATION. SKIN: CONTINUED CONTACT MAY CAUSE
    IRRITATION. SKIN ABSORPTION IS NOT EXPECTED TO OCCUR. EYES: WILL
    CAUSE EYE IRRITATION. INGESTION: ORAL  LD50 FOR THIS PRODUCT HAS
    NOT BEEN ESTABLISHED; DO NOT INGEST.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES; CONSULT
    MD. SKIN: WASH EXPOSED AREAS WITH SOAP AND WATER. INHALATION: IF
    IRRITATION OCCURS, REMOVE TO FRESH AIR AREA AND AVOID FURTHER
    INHALATION.  INGESTION: CONSULT MD. DO NOT INDUCE VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:365F,185C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . TREAT AS MINERAL OIL FIRE.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:RECOVER FREE LIQUID. KEEP PETRO PRODUCTS OUT
    OF STREAMS & WATERWAYS BY DIKING OR IMPOUNDING. ADVISE AUTHORITIES
    IF PRODUCT HAS ENTERED OR MAY ENTER SEWERS, WATERCOURSES OR
    EXTENSIVE LAND AREAS. ADD AB SORBENT TO SPILL & VENTILATE ENCLOSED
    AREAS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:BRING PRODUCT TO ROOM TEMPERATURE
    BEFORE USE. KEEP DRUMS CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH EYES AND BREATHING MISTS. DO NOT
    TAKE INTERNALLY. WEAR GLOVES AND PROTECTIVE EYEWEAR AT ALL TIMES
    DURING EQUIPMENT DECONTAMINATION OR REPAIR.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXCESSIVE MISTING OCCURS OR IF ASSOCIATED TLV
    IS EXCEEDED, PROVIDE NIOSH/MSHA APPROVED RESPIRATORY EQUIPMENT WITH
    TC-21C-XXX CARTRIDGE COMBINATION.
Ventilation:IF MISTING OCCURS, PROVIDE LOCAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:450F,232C
Vapor Pres:NEGLIGIBLE
Spec Gravity:0.86 (H*2O=1)
Evaporation Rate &amp; Reference:NEGLIG (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT AMBER; SLIGHT OILY ODOR.
Percent Volatiles by Volume:NEGLIG

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE, PRODUCT IS STABLE UNDER NORMAL
    CONDITIONS.
Hazardous Decomposition Products:OXIDES OF CARBON.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
    STATE AND LOCAL REGULATIONS . INCINERATE ABSORBED MATERIAL. DISPOSE
    OF FREE LIQUID BY INCINERATION OR THROUGH AN OIL RECLAIM SERVICE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.