FEDERATED-FRY METALS INC. -- ROSIN FLUX CORED SOLDER WIRES, WRP,WRMAP,WRAP -- 3439-00-766-4711 
=====================  Product Identification  =====================

Product ID:ROSIN FLUX CORED SOLDER WIRES, WRP,WRMAP,WRAP
MSDS Date:02/12/1992
FSC:3439
NIIN:00-766-4711
=== Responsible Party ===
Company Name:FEDERATED-FRY METALS INC.
Address:6TH AVENUE & 41ST STREET
City:ALTOONA
State:PA
ZIP:16602
Country:US
Info Phone Num:814-946-1611  FAX: 814-944-8094
Emergency Phone Num:814-946-1611800-424-9300(CHEMTREC)
Preparer's Name:CONTACT:DON PORTER
CAGE:65172
=== Contractor Identification ===
Company Name:FRY TECHNOLOGY DIV OF COOKSON AMERICA INC
Address:6TH AVE AND 41ST ST
Box:City:ALTOONA
State:PA
ZIP:16602
Country:US
Phone:814-946-1611
CAGE:65172

=============  Composition/Information on Ingredients  =============

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: VARIES
Other REC Limits:NONE RECOMMENDED
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9394

Ingred Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: VARIES
Other REC Limits:NONE RECOMMENDED
OSHA PEL:SEE 1910.1025
ACGIH TLV:0.15 MG/M3,DUST;9394
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:SILVER  (SARA III)
CAS:7440-22-4
RTECS #:VW3500000
Fraction by Wt: VARIES
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3; 9394
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:BISMUTH
CAS:7440-69-9
RTECS #:EB2600000
Fraction by Wt: VARIES
Other REC Limits:NONE RECOMMENDED

Ingred Name:INDIUM
CAS:7440-74-6
RTECS #:NL1050000
Fraction by Wt: VARIES
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.1 MG/M3
ACGIH TLV:0.1 MG/M3; 9394

Ingred Name:ANTIMONY  (SARA III)
CAS:7440-36-0
RTECS #:CC4025000
Fraction by Wt: VARIES
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG (SB)/M3; 9394
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ROSIN
CAS:8050-09-7
Fraction by Wt: 1-4%
Other REC Limits:NONE RECOMMENDED

Ingred Name:PRODUCT CONTAINS ONE OR MORE OF METALS (INGREDS #1-6) IN
    VARIOUS PERCENTAGES.
RTECS #:9999999ZZ
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:ROSIN FUMES DURING SOLDERING IRRIT
    EYE/SKIN.MOLTEN ROSIN CORE FLUX WILL CAUSE EYE/SKIN BURNS.NO
    ADVERSE EFFECTS KNOWN FROM SKIN
    ABSORPTION.INGEST:LEAD-TOXIC,AFFECTING KIDNEYS & CNS.TIN-NOT
    TOXIC,FEVER  & GI DISTURBANCES.ANTIMONY-TOXIC,EFFECTS NASAL SEPTAL
    ULCERATION & STOMACH LINING.INHAL:IRRIT RESP TRACT,CNS DAMA,(SUP)
Explanation of Carcinogenicity:PER MSDS:IARC CLASSIFIES LEAD & SOME
    LEAD CMPDS AS GROUP 2B CARCI,BASED ON CERTAIN SOLUBLE LEAD SALTS IN
    LAB ANIMALS.
Effects of Overexposure:EYE/SKIN:IRRIT,BURNS.
    INGEST:LEAD-ANEMIA,INSOMNIA,WEAKNESS,IRRITABILITY,CONSTIPATION,STOM
    ACH PAINS.TIN-FEVER,NAU,STOMACH CRAMPS,DIARR.ANTIMONY-NASAL SEPTAL
    ULCERATION,STOMACH LINING IRRIT.INHAL:ROSIN  FUMES-IRRIT OF RESP
    TRACT,DIZZ,HEADACHES,LEAD-DAMAGE TO CNS,KIDNEY SYS
    INVOLVEMENT,REPORDUCTIVE EFFECTS,FETUS INJURY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MFG.

=======================  First Aid Measures  =======================

First Aid:EYE:REMOVE FROM FUME EXPOUSRE. FLUSH W/WATER FOR @ LEAST
    15MINS. SKIN:COOL BURNS W/COLD WATER. GET MED TREATMENT. INGEST:GET
    MED HELP IMMED. NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
    INHAL:R EMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT ADMINISTER
    OXYGEN. GET MED ATTN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:PER MSDS N/A. HOWEVER USE APPROPRIATE EXTINGUISHING
    MEDIA FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SELF-CONTAINED BREATHING
    EQUIPMENT IF PRODUCT IS INVOLVED IN A FIRE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
    EMITS TOXIC FUMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF MOLTEN, ALLOW TO COOL AND SOLIDIFY, THEN
    SCRAPE UP.
Neutralizing Agent:NONE SPECIFIED BY MFG.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS.
Other Precautions:LEAD WARNING LABELS (IF APPLICABLE). KEEP OUT OF
    REACH OF CHILDREN. FOR INDUSTRIAL USE ONLY. DO NOT TAKE INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED. USE
    NIOSH APPROVED RESPIRATOR FOR EITHER ORGANIC VAPORS, DUST/FUME
    (HIGH EFFICIENCY FILTERS) OR BOTH IF TLV'S ARE EXCEEDED.
Ventilation:PROVIDE SUFFICIENT VENTILATION TO MAINTAIN EXPOSURE LEVELS
    BELOW TLV'S.
Protective Gloves:NOT USUALLY NECESSARY.
Eye Protection:FACE SHIELD OR GOGGLES DURING SOLDERING.
Other Protective Equipment:N/A.
Work Hygienic Practices:NO FOOD/DRINK/TOBACCO ALLOWED WHERE CORE SOLDER
    IS USED.WASH HANDS WELL AFT HNDLG & BEFORE DRINK/SMOKE/APPLYING
    COSMETIC
Supplemental Safety and Health
MELTING PT DEPENDS ON ALLOY COMPOSITION; PRODUCT CONTAINS ONE OR MORE
    OF INGREDS (METALS) IN VARIOUS PERCENTAGES. INHAL:PROLONGED
    OVEREXPOUSRE TO LEAD EFFECTS KIDNEY & REPRODUCTIVE SYS. LEAD
    EXPOSURE  RESULT IN INJURY TO DEVELOPING FETUS. OVEREXPOSURE TO
    TIN,SILVER,ANTIMONY,BISMUTH,INDIUM NOT EXPECTED.

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:SEE SUPPLEM
Solubility in Water:INSOLUBLE.
Appearance and Odor:SILVER GREY WIRE, VARIOUS SHAPES & SIZES, NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, STRONG ACIDS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:THE FUMES EMITTED IN SOLDERING
    OPERATION MAY CONTAIN FORMALDEHYDE,CARBON MONOXIDE,ROSIN & ROSIN
    DERIVATIVES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RETURN FOR REPROCESSING. MUST BE IN ACCORDANCE
    WITH FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.