THERMACOTE WELCO -- KLEEN GREEN - NOZZLE GEL  -- 3439-00N019437
<pre>=====================  Product Identification  =====================

Product ID:KLEEN GREEN - NOZZLE GEL
MSDS Date:07/10/1990
FSC:3439
NIIN:00N019437
=== Responsible Party ===
Company Name:THERMACOTE WELCO
Address:HWY 161 SOUTH YORK ROAD
City:KINGS MOUNTAIN
State:NC
ZIP:28086
Country:US
Info Phone Num:704-739-6421
Emergency Phone Num:704-739-6421
CAGE:0AES5
=== Contractor Identification ===
Company Name:THERMACOTE WELCO CO
Address:HWY 161 TORK RD
Box:City:KINGS MOUNTAIN
State:NC
ZIP:28086
Country:US
CAGE:0AES5

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS:8012-95-1
RTECS #:PY8030000
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3/10 STEL;9192

Ingred Name:GREEN DYE (PHARMACY GRADE)
CAS:4851-50-7

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE.
Explanation of Carcinogenicity:NOT RELEVANT
Medical Cond Aggravated by Exposure:NONE.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR A MINIMUM OF 15 MINUTES. SKIN: WASH
    W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR. CALL MD. INGEST: DRINK
    WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:>390F,>199C
Extinguishing Media:CO2, DRY CHEMICAL, OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA PRESSURE-DEMAND, SCBA & FULL
    PROTECTIVE EQUIPMENT . WATER SPRAY IS AN UNSUITABLE EXTINGUISHING
    AGENT.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SHUT OFF LEAK & DIKE UP LARGE SPILLS. AFTER
    COOLING & SOLIDIFICATION, SCRAPE &/OR SHOVEL UP MATERIAL. FINALLY,
    CLEAN AREA W/AN OIL ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM FLAME, HEAT (250F)
    MAXIMUM. ALSO KEEP AWAY FROM STRONG OXIDIZING AGENTS.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED.
Protective Gloves:IMPERVIOUS WHEN MOLTEN.
Eye Protection:WEAR CHEM WORKERS GOGG, WITH (SUPP DATA)
Other Protective Equipment:WHEN MOLTEN, WEAR COVERALLS.
Supplemental Safety and Health
EYE PROT: FACESHIELD WHEN MOLTEN. NEW JERSEY RIGHT TO KNOW INFORMATION:
    (HAZARDOUS & NON-HAZARDOUS) USP PETROLATUM CAS# 8009-03-8. GREEN
    DYE CAS# 4851-50-7.

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:100F,38C
Spec Gravity:0.815-0.88
Solubility in Water:NIL
Appearance and Odor:OPAQUE, NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.