PERMATEX INDUSTRIAL CORP -- FORM-A-GASKET 2 SEALANT, 80010, PART OF KIT 19834 -- 8010-00-551-1059
===================== Product Identification ===================== Product ID:FORM-A-GASKET 2 SEALANT, 80010, PART OF KIT 19834 MSDS Date:08/19/1993 FSC:8010 NIIN:00-551-1059 === Responsible Party === Company Name:PERMATEX INDUSTRIAL CORP Address:705 NORTH MOUNTAIN ROAD City:NEWINGTON State:CT ZIP:06111 Country:US Info Phone Num:203-278-1280 Emergency Phone Num:203-278-1280 Preparer's Name:STEPHEN REPETTO CAGE:62377 === Contractor Identification === Company Name:PERMATEX INDUSTRIAL Address:HARTFORD SQUARE N 10 COLUMBUS BLVD Box:City:HARTFORD State:CT ZIP:06106 Country:US Phone:877-376-2839 CAGE:62377 ============= Composition/Information on Ingredients ============= Ingred Name:CLAY (KAOLIN); (CLAY) CAS:1332-58-7 RTECS #:GF1670500 Fraction by Wt: 50-55% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:2 MG/M3 TDUST Ingred Name:ROSIN CAS:8050-09-7 RTECS #:VL0480000 Fraction by Wt: 15-20% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:CASTOR OIL, POLYMD., OXIDIZED; (VEGETABLE OIL) CAS:68439-93-0 Fraction by Wt: 15-20% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:ISOPROPYL ALCOHOL (SARA 313) CAS:67-63-0 RTECS #:NT8050000 Fraction by Wt: 10-15% OSHA PEL:400 PPM ACGIH TLV:400 PPM/500STEL Ingred Name:PHOSPHATAMIDES; (SOYBEAN DERIVATIVE) CAS:8002-43-5 Fraction by Wt: 1-3% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:VOLATILE ORGANIC COMPOUND (EPA METHOD 24):14.2% RTECS #:9999999VO OSHA PEL:N/K ACGIH TLV:N/K ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:TOXICITY:MODERATELY TOXIC BY INGESTION. EYE IRRITANT. SIGNS AND SYMPTOMS:VAPOR ABOVE TLV IS IRRITATING TO EYES, NOSE AND THROAT AND CAUSE CAUSE HEADACHE, DIZZINESS, NAUSEA. Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:SKIN, EYE AND RESPIRATORY DISORDERS. ======================= First Aid Measures ======================= First Aid:INGESTION:INDUCE VOMITING. OBTAIN MEDICAL ATTENTION. INHALATION:REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST, OBTAIN MEDICAL ATTENTION. SKIN CONTACT:WASH WITH SOAP AND WATER. EYE CONTACT:FLUSH FOR AT LEAS T 15 MINUTES WITH WATER. OBTAIN MEDICALATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:69.0F,20.6C Lower Limits:2% Upper Limits:12% Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL. Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:HAZARDOUS PRODUCTS FORMED BY FIRE OR THERMAL DECOMPOSITION:IRRITATING ORGANIC VAPORS. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE SOURCES OF IGNITION. MAINTAIN ADEQUATE VENTILATION. SCRAPE UP AS MUCH AS POSSIBLE AND STORE IN A CLOSED CONTAINER UNTIL DISPOSAL. RESIDUES MAY BE CLEANED WITH ISOPROPYL ALCOHOL. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE AWAY FROM HEAT AND FLAME. Other Precautions:AVOID PROLONGED BREATHING OF VAPORS. KEEP AWAY FROM EYES. AVOID PROLONGED SKIN CONTACT. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN . Ventilation:MUST BE ADEQUATE TO AVOID EXCEEDING TLV. Protective Gloves:RUBBER OR PLASTIC GLOVES. Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS . Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE SHOWER . Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:180F,82C Vapor Pres:33 @ 68F Vapor Density:2.07 Spec Gravity:1.5 @ 77F Evaporation Rate & Reference:7.7 (ETHER=1) Solubility in Water:PARTIAL Appearance and Odor:BLACK PASTE; ALCOHOLIC ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZERS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:NONE. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL REGULATIONS . INCINERATE FOLLOWING EPA AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.